Recommended Austin Service Intervals

Posted on May 18, 2012 by bbmuffler78704

Everyone in Austin Texas knows we’re supposed to go to the dentist twice a year. We get our teeth cleaned and have a thorough dental inspection. Once a year, we get x-rays to look for problems that can’t be seen with the naked eye. When the dentist is done, he tells us what he’s found – “Everything’s fine, see you in six months.” Or “You’ve got a small cavity starting, let’s schedule an appointment to take care of it.” By the time you leave, you have a plan for addressing any necessary repairs.

This system works so much better than waiting for a painful problem before going into the dentist. Small problems are fixed before they turn into big problems. And you avoid those huge bills.

If we buy into this way of handling our dental care, why do we resist so much when facing the same system for our car care?

B&B Muffler and Automotive Service Center
3000 S. Lamar Blvd
Austin, Texas 78704
512-447-5581

Following the manufacturer’s recommended intervals can be confusing. First there are recommendations for so many things: oil changes, transmission, coolant, air conditioning, power steering, brakes, fuel system, filters, belts, hoses, alignment, rotation, balancing …you get the point.

Every item has a recommended interval and it’s hard to keep it all straight – even if you’re part of the 1% of the population that reads your owners’ manual in Austin Texas.

And if you have more than one car or sedan, the complexity is multiplied. You’d need a computer to keep track of everything. Well, that’s how your Austin service center does it. They subscribe to automotive databases that have your vehicle’s recommended intervals. You may have wondered how they know what else to recommend when you take your car in for an oil change – it’s all in the computer.

Well, it’s not all in the computer. There are other variables that can’t be accounted for in the schedule. Things like the weather conditions, altitude, and where and how you drive when you are out in our Austin Texas area need to be taken into account. Talk about these things with your service advisor at B&B Muffler and Automotive Service Center and you may decide that the severe service schedule in your owner’s manual is more appropriate.

Since anything that’s not highway driving in moderate weather is considered severe, most of us do at least some of that around Austin Texas and it should be taken into consideration.

Let’s take your basic oil change as an example – what issues are involved? The oil you put in your car is a blend of base oil and special additives. There are detergents to clean the inside of your engine and corrosion inhibitors. A good quality motor oil will not only lubricate your engine, it will help it stay clean inside and run cooler.

Now, these additives deplete with use and time. That’s why most maintenance recommendations include both a time and mileage element – like 3 months or 3,000 miles, whichever comes first.

It’s easy to think, “Gee, I’ve only driven 2,000 miles in the last 3 months. I can wait on that oil change.” But you need to remember that the inside of your engine is a harsh environment. The oil is contaminated with combustion by-products that starts degrading its effectiveness even when it’s just sitting there.

A lot of people in Austin Texas don’t realize the harm that can be done by just skipping a single oil change. There are a lot of metal parts moving around in your engine. Small bits of metal wear off and are floating around in your oil. They can be carried to more delicate areas of the engine where they cause damage. Your oil filter is designed to trap metal particles and other dirt, but if it’s clogged up because you haven’t changed it, it can’t trap any more.

Oil sludge is another problem. Sludge is oil that has turned to a gunky jelly – think ‘Vaseline’. Obviously, sludge doesn’t lubricate. It can also clog small oil passages so that all the parts don’t get properly protected by the oil. That’ll lead to premature wear.

If you’ve missed some oil changes, don’t despair. Just talk with your service advisor at B&B Muffler and Automotive Service Center. Fess up – you’ll feel better. And he can help you get back on track. Following recommended intervals is the key to keeping your car on the road and avoiding major repairs in Austin Texas.

Take a look at the auto tips video in this post for more information.

Share
Posted in Service Intervals | Leave a comment

Saving Lives In Austin With Tire Pressure

Posted on May 8, 2012 by bbmuffler78704

All new passenger vehicles on our Austin Texas roads now have tire pressure monitoring systems – TPMS for short. They are designed to alert you if your tires are under inflated. Since they are fairly new, a lot of people have questions about TPMS.

First off, the most important thing is that you still need to check your tire pressure every week – or at least every time you gas up. The TPMS system alert comes in when your tire is twenty percent below the factory recommendation. So if the recommended pressure is thirty five pounds per square inch, the TPMS warning won’t come on until the pressure is at twenty eight pounds. That’s significantly under-inflated. Enough to raise safety concerns.

The worst is tire failure. A severely under inflated tire can overheat and fail. Also, handling degrades to the point that you may not be able to steer out of trouble. Also under-inflated tires wear out faster and they waste fuel. So it’s costly to not stay on top of proper inflation.

What’s the practical value of the TPMS system? Well, it’s twofold. First, it can alert you when your tire is losing pressure due to a puncture or a bent rim. That’s an important warning that you might not have gotten until next time you gassed up.

The second is that we all occasionally forget to check our tire pressure. So it’s a failsafe system to let you know there’s a problem brewing.

Other things can cause your TPMS system to go off. The system also monitors itself. The sensors that are mounted in the wheels have little batteries that send a signal to the monitor. The batteries go dead over time and the TPMS system will let you know. And the sensors could break. Also road salt from our Austin Texas roads can ruin them.

There’s also a hassle factor that your Austin Texas tire center has to contend with. For example, when you have your tires rotated in Austin, the TPMS system has to be re-calibrated so that it knows which tire is on which corner of the car. Same is true for when you have new tires or winter tires installed. Flat repairs, as well.

That takes extra time. And it requires the right equipment and training. Special – and expensive – tire change machines need to be used with some sensors. It’s all complicated by the fact that there are a number of different TPMS systems in use so the tire professionals at B&B Muffler and Automotive Service Center need equipment and training for each kind. Tire centers have had to raise the price of some of these basic services to offset their increased costs.

Also if you add custom wheels on your sedan, you need to put in new TPMS sensors if your originals won’t work on the new rims. If you don’t your TPMS light will be on constantly and you won’t have the benefit of the warning system.

All in all, the mandated TPMS systems will save lives, so they’re worth the added hassle and expense.

Share
Posted in Tires and Wheels | Leave a comment

Deep Clean Your Fuel System At B&B Muffler and Automotive Service Center

Posted on May 1, 2012 by bbmuffler78704

Having trouble with your fuel system? Bring your sedan into B&B Muffler and Automotive Service Center for a check up.
3000 S. Lamar Blvd
Austin, Texas 78704
512-447-5581

Today we’re talking about fuel system cleaning. The first thing to know is how important it is to have a clean fuel system. You need fuel to go, and the cleaner your fuel system, the more efficiently the fuel will burn. That means more power and better fuel economy.

A clean fuel system saves money at the pump. We guess you could say, it all starts and ends at the pump. One of the most important things you can do to keep your fuel system clean is to buy good quality gas. Major brands have detergents that keep gum and varnish from rapidly building up in the fuel system.

So buying cheaper gas can actually cost you in the long run. Now, most cars on the road are more than five or six years old. That means they’ve had time for some dirt and rust to start accumulating in the fuel tank. This junk needs to be filtered out of the fuel before it hits your engine. That’s the fuel filter’s job.

When the fuel filter is clogged, the dirty fuel will bypass the filter and go on up to the engine where it can clog fuel injectors and get into the cylinders. That could do some damage. So you should have your fuel filter changed when recommended. Check your owner’s manual or ask your service advisor if your fuel filter is due for replacement.

The fuel then goes up into the throttle body. This is another area where varnish and gum can accumulate. A professional fuel system cleaning will use a combination of special cleaning chemicals and old fashioned swabbing to clean out the throttle body. Now, the fuel injectors are the last stop in the fuel delivery system.

It’s real important to keep those fuel injectors clean. The fuel injectors need to deliver a precise amount of fuel, at exactly the right time, in a particular spray pattern. They just can’t do that if they’re dirty. Dirty fuel injectors really rob power and waste fuel.

It is important for the fuel system proper, but there are a couple other things that will help keep your engine clean as well. Of course, air is mixed with the fuel before it’s burned. Dirty air means dirt gets into your engine, so you need to replace your engine air filter when it’s dirty.

The PCV value routes unburned fuel that escapes into the lower engine back up into the intake system to be burned. A sticky PCV valve needs to be replaced to make sure that system is working properly and the breather filter needs to be replaced if it’s dirty as well.

Do all these things and your engine’s air and fuel will be as clean as possible. You’ll get much better fuel economy and better power

.

Share
Posted in Fuel System | Leave a comment

Cooling System Components

Posted on April 24, 2012 by bbmuffler78704

Today we want to talk about a very important system in our cars – the cooling system. It’s one of those things that you don’t give much thought to until it fails and then you’re stranded by the side of the road.

Cooling systems fail more often than any other mechanical system – usually because of neglect. Don’t you hate it when something breaks, and you could have done something to prevent it?

The good news is that if you take care of your cooling system it can keep working for the life of your car.

Here at AutoNetTV, we emphasize preventive maintenance services like replacing your coolant according to the factory schedule. But the various parts that make up the cooling system need attention too. The major components of the cooling system are the water pump, freeze plugs, the thermostat, the radiator, cooling fans, the heater core, the pressure cap, the overflow tank and the hoses.

It sounds complicated, but we don’t have to be experts – we can leave that to our honest and ethical service technicians at B&B Muffler and Automotive Service Center. But, having an overview will help us remember to take care of our cooling systems.

Most people would be surprised to know that burning fuel in your engine produces up to 4,500 degrees of heat. And all that heat has to be dealt with. If the heat can’t be drawn off the engine, the pistons will literally weld themselves to the inside of the cylinders – then you just have to throw the engine away and get a new one. That would cost thousands of dollars.

Now the water pump is what forces the coolant through passages in the engine to absorb heat. The pump is driven by a belt that needs replacement from time to time. And the water pump will eventually wear out and need to be replaced. Spending some money on replacing the belts and water pump is much less than the cost of repairing the massive damage that can be done when an engine seizes.

There’s another little part of the coolant system that protects the engine. It’s called a freeze plug. If you remember from high school chemistry, water expands when it freezes. In very cold areas, the coolant can actually freeze when the vehicle is left sitting.

It is hard to believe, but the expanding frozen coolant can actually crack the engine block. The freeze plugs fit into the engine block. They fit tight enough to withstand the pressure of a running engine, but can expand or pop out if the coolant freezes. These little things save a lot of engine blocks.

That brings up a good point. An engine has to work in all kinds of temperatures – extremely hot as well as very cold. How does the cooling system adapt to external temperatures as well as varying operating conditions?

Well, it’s much like the way you keep your house at a comfortable temperature all year round – with a thermostat. The thermostat in your car controls how much coolant flows through your engine. When the engine is cold, it restricts coolant flow until the engine comes up to an efficient operating temperature. Then it starts opening up to move more coolant to keep the temperature within a specified range.

The thermostat needs to be replaced from time to time as well. It’s easy to diagnose a failed thermostat and is fairly inexpensive to replace. We can do this for you at B&B Muffler and Automotive Service Center in Austin, just give us a call: 512-447-5581. Now we’ve been talking about all this heat we’ve got to get rid of, but haven’t really talked about where it goes. That’s where the radiator comes in. The hot coolant passes through the radiator. Air flows past the cooling fins and cools the coolant.

The radiator has two tanks that hold coolant: sometimes one the top and bottom or one on either side. If you have an automatic transmission, one of the tanks will also contain a second tank that cools the transmission fluid. Large SUV’s and trucks often have a separate transmission cooler. So when you drive around Austin, the air is forced past the radiator. But driving doesn’t produce enough air flow. So the radiator has cooling fans that force fresh air over the radiator. These fans may be powered by a belt or by electric motors.

Now, you also have something called a heater core. The heater core is like a mini radiator. A small fan blows air over the heater core and into the passenger compartment of your vehicle. That’s how you warm your car when it’s cold out.

Next is the radiator cap. With most newer cars around Austin, you never remove the radiator cap, except to replace it. You add coolant through the overflow tank. The radiator cap is also called a pressure cap, because its job is to maintain pressure in the cooling system.

High pressure raises the boiling point of the coolant, so it cools more effectively even in very demanding conditions. That is why you need to replace the cap from time to time. They recommend changing it out every time you replace your coolant.

Coming back to the overflow tank, it is needed because when the coolant gets hot it expands and the overflow holds the extra volume. The tank helps maintain the proper level of coolant and keeps air out of the system. You should never open the radiator cap or over flow tank when the engine is hot. This could lead to serious burns.

What else do we need to do to keep our cooling systems working well? Well, there are the hoses that hook all of these pieces together. They’re obviously very tough to deal with the pressure and high temperatures. But they do get worn. Sometimes they get spongy from the heat. Sometimes they lose their connection to the radiator, water pump, etc. It’s a great idea to have your Austin service center inspect your hoses at least once a year and replace them, if needed, before they break.

B&B Muffler and Automotive Service Center can help you check your cooling system and make any necessary adjustments or repairs. Give us a call at 512-447-5581.

Share
Posted in Cooling System | Leave a comment

Introduction to Diesels for Austin Texas

Posted on April 18, 2012 by bbmuffler78704

Something you’re going to be hearing a lot about around Austin, Texas is diesel engines. We’re not talking about semi-trucks and buses – We’re talking about diesel engine cars, pick-ups and SUVs.

Most people in Austin, Texas are surprised to learn that around half the cars on the road in Europe have diesel engines. Nearly all import auto manufacturers offer a range of diesel engines abroad – even the ultra-luxury brands like Mercedes and BMW. For the most part, these diesel engines haven’t been available in Austin, Texas. But that’s about to change.

In the past, North American diesel fuel has had a much higher sulfur content than European fuel. Recent environmental laws have required changes in diesel formulation and emissions standards here in Austin, Texas so we are now ready to start seeing more diesel options offered over the next few years.

Why are so many interested in diesel engines? Well first off, diesel fuel is more energy dense. There’s more power in a barrel of diesel fuel than there is in a barrel of gasoline. That means better performance with better fuel economy.

Diesel powered vehicles get about 20 percent better fuel economy. And as for power – why do you think that the majority of new heavy duty pick-up trucks are being sold with diesel engines?

If you think back to the late 1970’s and early 1980’s, you may shudder when you think of the diesel powered cars of the day – noisy, smoky, under-powered beasts that rattled and shook their passengers. Modern diesels are nothing like that.

They are quiet, clean – and very powerful. They’re so refined that many people can’t even tell they’re riding in a diesel powered car. In addition to fuel savings, diesels generally last longer than gasoline engines because of their heavy duty construction.

Another thing that intrigues the environmentally conscious is that it’s possible to use bio-diesel as fuel. Bio-diesel is made from vegetable oil – even recycled cooking oil from restaurants. Hybrid cars have gotten everyone’s attention these days. Look to diesel-electric hybrids in years to come to make a good idea even better.

Every year, manufacturers are planning more diesel offerings. Look for diesels in domestic light trucks, SUVs and passenger cars. Import marquees have plans to bring more of their outstanding diesel engines to Austin, Texas as well.

Now you should know that properly maintaining a diesel engine is somewhat different than a gasoline engine. Fluid change intervals are different. Emissions control devices have to work harder to filter diesel fuel and to scrub the exhaust so you will need to pay attention to that. And the fuel injection system operates at much higher pressures than gas fuel injection systems, so it’s very important to keep your fuel system clean with a diesel.

The good news is that your local Austin, Texas service center is keeping up with the new diesel technology and will be able to advise you on maintaining your diesel.

When we tell you to look for more diesels, you won’t be looking for smoky tail pipes as a clue. You also won’t be listening for that familiar big rig rattle. And, you certainly won’t be waiting for them at the stoplight, because modern diesels are as quick as their gasoline counterparts.

From all of us at AutoNetTV, ten four, good buddy.

Share
Posted in Fuel System | Leave a comment

ICE – In Case Of Emergency In Austin Texas

Posted on April 12, 2012 by bbmuffler78704

Sometimes the unthinkable happens in Austin Texas. A terrible accident and those involved aren’t able to provide rescuers with emergency contact information.

You have people in the Austin Texas area who you’ll want to be contacted to arrange help, give consent to treatment, and inform paramedics of medical conditions, allergies or medications.

Too often, our Texas police and rescue workers must sift through pockets, glove compartments, wallets, purses and cell phone directories for clues – often wasting precious time.

A brilliantly simple solution is now spreading around the globe: ICE. ICE – standing for In Case of Emergency, is a way to identify emergency contacts in your cell phone directory.

Simply put ‘ICE’ before a contact name in your cell phone, like ‘ICE – Dad’, ‘ICE – Nancy’, or ‘ICE – Doctor Roberts’. Rescuers will be able to quickly identify your emergency contacts, saving valuable time.

Bob Brotchie, a Cambridge, England paramedic came up with the idea and started a promotional campaign in England in 2005. This powerful idea is now being heavily promoted in Austin Texas and in other countries. Rescue workers all know of how many times they are unable to find a wallet or purse on an accident victim, yet they are seldom without their cell phone.

There are national and worldwide disaster databases, but participation can cost up to two hundred dollars a year. ‘ICE’ is free to the 276 million cell phone users in the U.S.

It is easy and just takes a few minutes to designate some ICE contacts in your cell phone. Remember to keep the listings current.

Please join B&B Muffler and Automotive Service Center in getting the word out. Help us put Austin Texas on ICE!

Share
Posted in Monitoring System | Leave a comment

Transmission Care In Austin Texas

Posted on April 6, 2012 by bbmuffler78704

Call B&B Muffler and Automotive Service Center to make an appointment to check your transmission in Austin.
3000 S. Lamar Blvd
Austin, Texas 78704
512-447-5581

Do you have any plans around Austin Texas for the weekend? Maybe you and some friends and are taking the boat up to the lake. Maybe you’ll be having a lot of fun water skiing and doing a little fishing.

You got the boat all ready. It’s all gassed up. You packed lots of snacks and the cooler’s stocked – ready to go.

How about your tow vehicle? It has plenty of gas and you’ve even vacuumed it out, but is your auto maintenance up to date?

Stop and think. You’ll have some heavy traffic on your way out of town. Hilly terrain as you get to the lake. Some dirt roads – and it may be hot weather. And all the time you’re going to be towing around several thousand extra pounds.

That all adds up a lot of severe strain on your engine, brakes and transmission. Your transmission’s going to be working overtime, spending more time in lower gears. The internal transmission temperature is going to be much higher than normal. What’s a fun little blast to the lake for you is really severe duty for your transmission.

It’s important that you have enough transmission fluid. If you’re running low, the transmission will run to hot and won’t have the protection it needs to cope with the added stress of towing.

And if it’s time for a transmission service, you really should have it done at B&B Muffler and Automotive Service Center before your trip. Transmission fluid breaks down and gets dirty over time. Whether you have an automatic or manual transmission, you need to have it serviced on schedule to make sure it runs efficiently.

Automatic transmissions contain a maze of passages that the fluid has to pass through to keep it shifting smoothly. If you neglect transmission service, the passages can get clogged up and you start to have problems. Neglect your transmission for too long, and it can fail. Believe us – you don’t want to pay for a major transmission repair.

You know, most of us in Austin Texas do a lot of our driving under severe conditions. Towing or hauling a big load is obvious, but there are lots of other things that constitute severe driving conditions. Things like short trips or driving in very hot or very cold weather. Also, dusty roads, city driving around Austin, and basically any driving that’s not at highway speeds or under ideal conditions is severe driving. We all need to think about whether or not we need to follow the severe service schedule.

So, consider going in for a full service oil change before you leave for the lake to make sure everything has been looked at. Ask for a trip inspection while you’re at it. Your Austin Texas service technician at B&B Muffler and Automotive Service Center can check your belts and hoses and let you know if your brakes are in good shape.

Don’t forget the sunscreen. And to thank your Austin service technician, how about bringing him back a nice trout?

Share
Posted in Transmission | Leave a comment

TPMS: Tire Pressure Monitoring For Your Austin Auto

Posted on March 28, 2012 by bbmuffler78704

You may know that all 2008 model year and newer cars, mini-vans and light trucks in Austin come with a tire pressure monitoring system. Many slightly older vehicles around Austin have these systems as well. A tire pressure monitoring system – called TPMS – consists of sensors on each wheel that measure tire pressure.

If tire pressure drops 25 percent below the manufacturer’s recommended pressure, the sensor sends a signal to a monitoring unit that causes a warning to light up on the dashboard. When you see the warning light, you know it’s time to put some air in your tires.

There are many benefits to driving with properly inflated tires around Austin. First is cost savings. Running at the correct air pressure improves fuel economy. Driving on under-inflated tires is like driving through sand – it drags down your fuel economy. You’ll also see longer, more even tread wear so your tires’ll last longer.

Another important benefit of properly inflated tires is increased safety. Under-inflated tires become hotter and that heat can actually lead to tire failure – possibly resulting in an accident. Your car and the tires themselves will just perform better and more safely around Austin with properly inflated tires.

Local Austin consumer groups, law-makers and vehicle manufacturers advocate TPMS systems hoping that they will save lives, property damage and inconvenience. While you can’t put a value on saving a life, we keep in mind that TPMS systems will carry a cost.

The systems themselves are added into the price of the car. The batteries in the sensors will have to be replaced from time to time. Parts will break and need to be replaced. In colder climates around Texas, ice and salt are frequent causes of failure.

In addition, there are other behind-the-scenes costs to be aware of. Every time a tire is replaced, repaired, rotated or balanced, the tire technician has to deal with the TPMS system.

Your service center (B&B Muffler and Automotive Service Center) must purchase equipment used to scan and reactivate the TPMS system after every tire service. Because older tire change equipment can damage TPMS sensors, your service center may need to buy expensive, new tire changers.

Since there is no uniformity among manufacturers, technicians need to be trained on several TPMS systems. These behind-the-scenes costs are very real to your service center.

That’s why they are anxious for you to understand the financial impact of TPMS systems. In the past, they’ve been able to quickly and cheaply provide tire services, and then pass the low cost on to you as an expression of their good will. But now even these simple jobs will take much longer.

Sensors will need to be removed and reinstalled. Even a tire rotation will require that the monitor be reprogrammed to the new location of each tire. When a car battery is disconnected, the TPMS system will need to be reprogrammed.

So when you start so see the cost of tire changes, flat repairs and rotations going up, please keep in mind that it’s because of this new safety equipment. B&B Muffler and Automotive Service Center just wants to keep you safely on the road – and we’re committed to do so at a fair price.

It’s important to remember that the TPMS warning only comes on when a tire is severely under-inflated. You’ll still want to check your tire pressure on a regular basis. At every fill-up is best, but you should check pressure at least once a month. Here’s wishing you safe travels.

Contact B&B Muffler and Automotive Service Center for more information about Tire Pressure Management Systems.

Share
Posted in Monitoring System | Leave a comment

Timing Belt Replacement in Austin

Posted on March 23, 2012 by bbmuffler78704

Today we want to talk about timing belts. They’re something that many Austin drivers don’t know much about and yet your vehicle won’t run if it’s broken – and it could cause many thousands of dollars damage if it does break. A broken timing belt is usually a tale of woe. Even though timing belt replacement is scheduled in the owner’s manual, it’s not the kind of thing that most San Marcos car owners remember because it’s not well understood.

Let’s review what a timing belt does. As you know, the engine’s power is generated in the cylinders. A piston rides up and down in the cylinder. During the first down stroke, an intake valve at the top of the cylinder opens and air and fuel is drawn into the cylinder. Then the piston returns to the top, compressing the fuel and air mix. At the top, the spark plug fires, igniting the fuel pushing the piston down in the power stroke. As the piston once again returns up in the final stroke of the cycle, an exhaust valve opens at the top of the cylinder and the exhaust is pushed out. The timing belt is what coordinates the opening and closing of the intake and exhaust valves. It’s called a timing belt because the valves have to open and close at just the right time.

Now, not all San Marcos and Dripping Springs vehicles have timing belts. Some have timing chains. Like the name implies, they use a chain rather than a belt to perform the function. It used to be that most engines used timing chains, which are extremely durable. Manufacturers started using belts rather than chains to save money in the manufacturing process. So now we’re left with a component that can break. They sort of shifted the problem to us. There are two broad categories of engine design: interference and non-interference. If the timing belt on a non-interference engine breaks, the engine simply stops running. That could be very dangerous depending on where you are at the time, but it causes no internal engine damage.

Interference engines, on the other hand, will get real messed up when the timing belt breaks, because the valves will actually fall down into the path of the pistons. Things get chewed up when that happens and it’ll cost thousands to repair the engine.

So, what are the warning signs? Unfortunately, there really aren’t any. There aren’t tell-tale sounds. In some vehicles, a technician from B&B Muffler and Automotive Service Center may be able to see part of the belt for a visual inspection, but many have a cover that’s in the way. The reality is that if the belt slips even one notch, it might as well be broken for all the damage it’ll cause. There’s no middle ground.

So how can we avoid these problems? Simply replace the timing belt when your owner’s manual calls for it. It can be 60,000 miles; it might be 90,000 or 100,000 miles. The point is, if you have 60,000 or more miles, ask your B&B Muffler and Automotive Service Center service advisor right away if your manufacturer requires a timing belt replacement.

Contact B&B Muffler and Automotive Service Center to learn more about your car’s Timing Belt
You can find us at:
3000 S. Lamar Blvd
Austin, Texas 78704
Or call us at 512-447-5581

Sometimes you can go quite a while without a failure, but we’ve seen them happen within a couple of oil changes of being due. It’s not worth the risk.

What does it cost to replace a timing belt in Dripping Springs or Georgetown? Well, that really depends on what kind of car you have. I can tell you that it’s usually not very easy to get to the timing belt – you often have to remove some accessories to get at it. It isn’t a cheap procedure, but it’s a fraction of what it could cost to repair the damage caused by a failure.

At B&B Muffler and Automotive Service Center we’re all about trying to prevent costly repairs, keeping you and your passengers safe and increasing your driving enjoyment. Thanks to AutoNetTV for their great auto video tips.

Share
Posted in Parts | Leave a comment

On Board Diagnostics For Your sedan

Posted on March 13, 2012 by bbmuffler78704

Make an appointment with B&B Muffler and Automotive Service Center to have your on board diagnostics analyzed.
3000 S. Lamar Blvd
Austin, Texas 78704
512-447-5581

Today we’re going to talk about on-board diagnostics and the questions we hear from folks around Austin Texas who need answers about diagnostic services. They want to know what diagnostics are, what’s involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Austin Texas.

These are valid concerns. If you don’t understand something it’s really hard to know its value. Let’s start with some history.

Since 1996, all cars and light trucks in Austin Texas have been required to use a standardized diagnostic system to help repair technicians determine what’s wrong with your vehicle. The diagnostic system works with the vehicle’s Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can’t adjust for, the computer will turn on the check engine light.

It is also called the ‘service engine soon’ light on some vehicles. The warning light signals you to get into your Austin Texas service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you’ve searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what’s wrong.

That’s a common myth. The code itself doesn’t tell you what’s broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won’t tell you what’s wrong or how to fix it.

Let’s say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You’ve confirmed a fever, but you don’t know what’s causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician’s examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads ‘Bank 1 sensor 1 circuit slow response’. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that’s all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that’s stored in the engine control computer. That history’s very helpful in diagnosing the problem. Service centers like B&B Muffler and Automotive Service Center invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don’t need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at B&B Muffler and Automotive Service Center. If the light burns steady – don’t panic. Get in to B&B Muffler and Automotive Service Center soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.

Share
Posted in Service Standards | Leave a comment